Line the bottom of foam block with felt. It's gonna allow that glue to adhere to that metal a little bit better.
Glue the foam block to the felt.
Glue the entire piece foam side down into the container.
Prep florals
Trim and separate floral bushes.
Separate the ferns from the 60919. You'll use those towards the end of the project.
Fluff out the stems.
Add floral stems to containers
Add your stems into the foam block in each container, starting with the 60919.
Secure with hot glue.
Add containers to moss base
Determine where you'll place containers.
Use a metal whole punch to create spots to fish wire through and attach to base.
Super glue at additional points to ensure containers stay in place.
Touch up with florals and bows
On each open corner of the base add a floral stem. Bend them outward in opposite directions so they have a center point. (Don't worry the bare centers will be covered by a bow)
Take your 1.5" ribbon, and measure out (2) 11" loops, pinching and twisting.
Next bring in the next 1.5" ribbon, and create (4) 12" loops.
Last add your 2.5" ribbon, creating (2) 14" loops
Zip tie your layers together.
Fluff out your bow.
Curl your tails.
Attach at the center point of the stems you just added to each corner.
Add the ferns from the 60919 around the bow areas.
Notes
You can substitute the grapevine moss form with a 14"-16" oval grapevine base.