Go Back
Full view of the completed pink and green berry swag, showing a cascading floral arrangement with pink berries, greenery, and a two-ribbon bow at the top.
Print

Equipment

  • Wire Cutters
  • hot glue gun & glue sticks
  • Scissors

Materials

  • 2 Green Berry Picks – Hobby Lobby SKU# 5853437
  • 2 Hot Pink 60919 Floral Sprays – DecoExchange
  • 2 Eucalyptus Sprays – SKU# FG5687 from DecoExchange
  • 1 Long Stem Pistacia Spray – SKU# 13464GN from Liberty Floral
  • 1 White Astible Bush – SKU# 25608 from At Home
  • 2.5” Taupe Quatrefoil Ribbon – SKU# 841-40-167
  • 1.5” Pink Lace-Edge Ribbon – SKU# RGC1302EH from Deco Supply Box
  • 6” Zip Ties

Instructions

Build the Greenery Base:

  • Start with one eucalyptus spray and add the second slightly offset for a layered base.
  • Zip tie them together in the middle to secure your starting shape.

Add the Berry Picks:

  • Insert the two green berry picks into the base, one on each side for balance.
  • Use another zip tie to secure them tightly in place.

Layer in the Florals:

  • Insert the pink 60919 florals with height variation—one reaching higher and one dipping slightly lower.
  • Cut the long Pistacia spray into 2-3 pieces and fan them through the middle and lower edges.
  • Finish with pieces of white astible to add soft, wispy texture throughout.

Create the Bow:

  • Use two ribbons: the 2.5” taupe and 1.5” pink lace.
  • Make a six-loop bow (three loops per side) alternating ribbon types.
  • Layer tails beneath the loops and zip tie the entire bow in the center.

Attach the Bow:

  • Zip tie the bow right at the top where all stems meet.
  • Fluff and spread the loops for a full look.

Final Adjustments:

  • Fill any gaps with leftover floral sprigs.
  • Use hot glue for security if anything feels loose.
  • Dovetail ribbon ends and fluff greenery as needed.

Notes

Don’t be afraid to let some stems trail down to add height and flow—especially with eucalyptus and berries!