Start with the 18” wooden door hanger and ensure it's clean and smooth.

Decide on the placement of your bow and greenery.

Cut two 24-inch pieces of the 2.5” Black/White Stripe Ribbon.

Cut two 22-inch pieces of the 2.5” Natural/Black Fancy Panty Edge Ribbon.

Cut two 20-inch pieces of the 1.5” Natural/White Stripe Ribbon.

Cut two 18-inch pieces of the 1.5” Black/White Fancy Panty Edge Ribbon.

Take one 24-inch ribbon and form a loop by overlapping the ends by 2 inches.

Repeat this step with all ribbons, stacking them largest to smallest.

Pinch the center and secure with a zip tie.

Adjust the loops so they fan out evenly.

Cut the ribbon tails at an angle or dovetail for a finished look.

Attach the Bow to the Door Hanger

Use a pencil tie or zip tie to secure the bow to the door hanger.

Make sure it's tight and centered.

Use wire cutters to trim greenery pieces into small sections.

Arrange greenery behind the bow to create a balanced look.

Secure with hot glue or staple directly into the wooden base.

Adjust the bow and greenery for a full and even design.

Make sure all pieces are securely attached.

Hang on your door and enjoy!