Add your sign extender and hanger

• Start with your door hanger (DECO-W-119-DH, DecoExchange).
• Take your sign extender and add it to the back of the door hanger on the top right using a staple gun with ⅜ light duty staples (as many as possible for security).
• Take leftover rope and add it to the top back of the door hanger using staples to make a hanger.
• Cut off any excess.

Add your mesh

• Take a red pipe cleaner and add it to the sign extender.
• Take a leftover 10” mesh and cut 2 x pieces.
• Take the mesh and make ruffles by pinching the ends together.
• Add the ruffles to the sign extender using the pipe cleaner.

Make and add your bow

• Take various wired and no wired ribbons and cut 10” strips of each.
• Dovetail the ends of the wired ribbons.
• Layer your ribbons.
• Pinch the center of the bow and secure it with a zip tie.
• Fluff out your bow.
• Take a piece of ribbon and lay it over the center of the bow using glue to cover the zip tie.
• Add a wire through the bow and twist it to secure it.
• Add your bow to the center of the ruffles using the wire

Photo Editing with PicTapGo

Single Photo:

• Open your PicTapGo app.
• Choose your photo.
• Select “edit” at the top right of the screen.
• Scroll down and choose your preferred effect.
• Select “go” at the top right of the screen to continue.
• Select “camera roll” at the bottom to save the picture to your device.

Multiple Photos:

• Choose your photo.
• Select “edit” at the top right of the screen.
• Scroll down and choose your preferred effect.
• Select “go” at the top right of the screen to continue.
• Select “batch” to add more pictures.
• Select all the photos that you want to batch and select “apply to [number] images” at the bottom right of the screen.
• All the selected photos will be edited with the same effect and added to your device.