Prep your base
Cut deco mesh in 19” strips x 18 times
Fold mesh about ½”, then ruffle up the middle
Add ruffle in twist tie on wreath base; twist twice
Cut burlap mesh in 19” strips x 18 times
Ruffle up the middle, open twist tie and add on top of deco mesh, twist back
Once all mesh and burlap has been added, pull away from center
Prep your metal sign
Punch a two holes in the metal sign, top and bottom
Place in center of wreath, and attached to wreath base
Make bow
Use E-Z bow maker
Layer one: make 8” tail, twist and make 7” loop on each side; make 2 more loops and end with 8”tail
Layer two: make 8” tail, twist and make 6” loop on each side; make 2 more loops and end with 8” tail
Layer three: Add a tail about 12” long
Layer four: make a 8” tail, twist and make 5” loop on each side; make 2 more loops and end with 8” tail
Layer five: make a 8” tail, 4” loop twist, make one more 4”loop and 8” tail
Attach pipe cleaner to center of bow, twist together
Position bow on wreath
Trim tails as needed; Optional: you can add a touch of hot glue to loops to hold in place
Prep florals
Cut florals from stems
Add around bow by adding to twist ties with a dab of hot glue
Add greenery in any empty spaces with a dab of hot glue