Prep the flocked evergreen by squeezing together into a tight oval
Add a piece of garland down the middle
Connect three 6” zip ties and fasten in the back of base to add support
Flatten the back
Attach some of the evergreen twist with the garland twist
Fluff all the branches out
Prep the disco ball ornaments, make a hole with u-pin in top of ornament, add hot glue and put u-pin back in
Push a pipe cleaner under the u-pin, add more hot glue, press u-pin securely down
Allow them to dry
Make a bow
Using 4” ribbon, 10” tails, twist, pinch, loop 8” loops, x2, add a pipe cleaner
Using 2-½” ribbon, 8” tails, twist, pinch, loop 8” loops x2, add a pipe cleaner
Using 1-½” ribbon, 8” tails, twist, pinch, loop 7’’ loops x4, dovetail end
Cut a 14” strip of the 2-½” ribbon, dovetail and layer on top
Using ⅞” ribbon, 8” tails, twist, pinch, loop 6-½” loops x4, dovetail ends
Attach all layers together with a pipe cleaner
Fluff all the loops and tails of the bow
Cut 20” strips of deco mesh x8 of first color
Make a woodland ruffles, add about 4 pieces on each side and tue with the pine tines (not into the garland)
Add disco balls, starting at the bottom, using the pipe cleaner and twist them together with the pine tines, add hot glue if needed
Add the bow to the top of the base above the disco balls
Make a fake tail using the 4” ribbon, pinch one end and tie it in the bottom of the base, dovetail the ends
Make a bow, using the 2-½” ribbon and make a clover bow (4 loops), add into the bottom of the base with the pine tines
Using two different colors of -½” ribbons, add one of the ends under the top bow and make a roller coaster loop, and tail, fluff out
Continuing with the 2 colors, make a tail, roller coaster loop, tail on the opposite of the swag
Prep floral pick, separate into three smaller pieces and add with hot glue on both sides of base
Separate the next sparkle pick into smaller pieces and add with hot glue on both sides
Using garland ball pick, separate the balls off the stem and using hot glue add into a couple of the tails and in center of bows
Separate an evergreen winter spray into smaller pieces and using hot glue put around the disco balls and the bows
Separate a small ball picks into pieces and using hot glue put in various spots throughout the base
Add a few pieces of glitter spray, curl the ends and add with hot glue in various spots throughout the base
Fill in any spaces with other floral sprays and /or picks